- The CB220 Start
Kit is recommended for 1st timer users of CUBLOC who need only maximum of 16 digital inputs/outputs.
-
The CB220 Start
Kit comes with a study board which has a breadboard that the user can test
different peripherals and get used to the development environment of Comfile
products.
- Start Kit
consists of : CUBLOC core module CB220 + CUBLOC Study Board + RS232 serial cable
+ User's Manual + All necessary development software on CD
(A power supply
is NOT included with this kit)
(Required Power:
9~24V DC power supply w/ > 200mA)
[CB220]
-
Ideal for apps requiring small number of I/O
ports.
- Ideal for small to mass production (1 to 1000+),
Embeddable in
customized PCB (DIP)
- MODBUS ASCII (Master & Slave Mode)
Support
- MODBUS RTU (Master & Slave Mode)
Support
- External Peripherals CuNET (I2C) included.
- External Peripherals SPI included.
-
Develop using CublocStudio in BASIC and/or Ladder Logic
Language.
- PIN compatible with BS2
|
Processor |
CUBLOC CB220 |
|
Microprocessor |
Atmega128 @ 18.432Mhz |
|
Program Memory (Flash) |
80KB |
|
Data Memory (RAM) |
2KB(BASIC)
+
1KB(Ladder Logic) |
|
EEPROM |
4KB
EEPROM |
|
Program Speed |
36,000/sec |
|
General Purpose I/O |
16 I/O lines (5V
TTL)
(input/output configurable) |
|
Serial Ports for Communication |
-
2 High-speed hardware-independent serial ports (Channel 0: RS232C 12V, Channel 1: TTL 5V)
-
Configurable Baud rates: 2400bps to 230,400
bps
|
|
Analog Inputs |
8
Channel 10-bit ADCs |
|
Analog Outputs |
- 3 Channel 16-bit PWMs (DACs)
- Configurable Frequency: 35hz to 1.5Mhz
|
|
External Interrupts |
None |
|
High Speed Counters |
2
Channel 16-bit Counters (up to 2Mhz) |
|
Power |
5 to 12V,
40mA (ports unloaded) |
|
RTC
(Real Time Clock) |
No |
|
Timers |
-
1 User
Configurable Timer
-
Configurable
Interval Units = 10ms |
|
Data Memory Back-up |
None |
|
Operating Temperature |
-40 °C to 120
°C |
|
Package |
24-pin
DIP 600mil
|
|
Size |
1.2"L x 0.6"W x 0.4"H
(30 x 15.3 x 11
mm) |
|
){kind=small}
