Thank you for your time.
In fact, I am Moacon user as you may see in my older posts. We can use source output modules of Moacon directly to drive selenoid valves in our projects.
On the other hand, to be honest, the cost of projects based on Moacon modules is the problem which forces me to search for alternatives in Comfile product range. In many project we do not need high speed execution time of code and so I thought to use Cubloc series instead of Moacon. The problem is that, we are not deal with 5V TTL levels but 24V levels (Sensors, piston valves, etc). Cubloc core modules are at 5V TTL levels. And ıt seemed me that is not what I want. Then I discovered the baseboard extensions and excited. Inputs of baseboard was at 24V which I need. Outputs was also 24V levels but was not sufficient for our loads about 0.5A. I am suprised of that and fell in doubt that am I only the one who need 0.5A current to drive a simple piston valve which is a generic application. The peoples who use Cubloc series should need such a current and should handle it in a way. That is the thing I want to locate. I believe one of your product is the one I need but the alternatives I have seen in the web site was not until now.
Transistor outputs of baseboard ... Not sufficient current
Relay baords ... avoding to use them beacuse of mechanical contact solutions
SSR8 board .... For AC purposes only
Buinding my own extension board with ULN2803 .... I am not eager to do that beacuse of heavy working hours and days (designing, drawing, board production, mounting, testing etc).
Your instant solution .... ?????? waiting.
PS: CUTOUCH is ok. We can use it where we need HMI based project. But the solution for projects which does not need HMI is still empty.