Build a digital thermometer in 1 minute!
February 9th, 2007
Click Here to View in Full Screen Mode
Here’s a digital thermometer example using a CB280 Start Kit,
CLCD420B, and a DS1620 chip.
via zedomax
Digital Drawing Board using CUBLOC CB280 and GHLCD graphic LCD
February 9th, 2007
Click Here to View in Full Screen Mode
Here’s a simple howto on making a digital drawing board using a
CUBLOC CB280, GHLCD, and the study board.
RGB Light Orb Alarm Clock using CUBLOC CB280 and mini-proto
February 9th, 2007
Click Here to View in Full Screen Mode
Here’s a light orb alarm clock you can build using a CUBLOC CB280,
CB280 Mini-Protoboard, and a CLCD420B. This light orb will change
colors and also sync to on-board piezo music. You can set the alarm
to go on in the morning so you wake up to lights instead of an
annoying traditional alarm clock.
via zedomax
Internet Controlled Security Robot
January 22nd, 2007
Wow, here’s a cool internet controlled security robot using CUBLOC
CB280, CuBASE 32M, CLCD420B, and a MAXPORT. Thanks Shelato!
There are two components to the interface. One a Visual basic program that sends and receives commands to the cubloc. Two, the cubloc program that receives the commands, controls the cubloc and turns the outputs on and off.
The fully load version on the test stand. It runs wireless!!!!!!!! However, I’m tethered to the power supplies for the Linksys router and Cubloc power supply. Next weekend we go to full battery power.
The Maxport is sticking out the backend of truck connected to the Linksys router through the blue ethernet cable. 2 Green lights can been seen on the Cubloc. The LCD display is in the passanger window.
via cubloc forum
Make an alarm system in 1 minute!
January 18th, 2007
Click Here to View in Full Screen Mode
Here’s an experimental alarm system you can build using a CUBLOC
CB280, CUBLOC Study Board, CLCD420B, Keypad, Keypad Controller,
and some parts from Radio Shack and Home Depot.
via zedomax
1f72Fuzzy Logic Perm Machine for Salons using CUBLOC CB280 module and Graphic LCD
January 17th, 2007
Above: Before and After Pictures of using the Perm Machine.
Here’s a cool fuzzy logic perm machine for salons over in Japan using
CUBLOC CB280 module and GHLCD graphic LCD from Comfile.
The CB280 uses Ladder Logic to control the complex fuzzy logic of
the perm machine hair dings (The things you roll your hair with).
This thing also has an XPORT module which allows the company to
analyze and fix customer’s problems over the internet on top of
updatable firmwares.
The company grew 10 times in size and moved their offices twice
due to massive growth of sales. They are now bigger than Comfile
Technology… :p
The above example uses a customized firmware version of MAXport,
for custom internet MAXport inquiries, please send them to
engineering@comfiletech.com.
Click below for more pics!