Comfile Blog

Check out this smartMMS system which allows you to monitor and control your CNC machine remotely.

This device is new so I don’t think it’s on their homepage yet but you can inquire them about getting one here.

Click Here to View in Full Screen Mode

Here’s a digital thermometer example using a CB280 Start Kit,
CLCD420B, and a DS1620 chip.

via zedomax

Click Here to View in Full Screen Mode

Here’s a simple DIY on using a CuSB22R and some parts to make
Christmas Light controller in 5 minutes. This is very similar to the
party light howto.
This can be applied to make other types of light controllers or
anything that is DC or AC.

via zedomax

Click Here to View in Full Screen Mode

Here’s a simple howto on making a digital drawing board using a
CUBLOC CB280, GHLCD, and the study board.

Click Here to View in Full Screen Mode

Here’s a fun Golf POV (Persistence of Vision) application you can make
and learn about LEDs (Light Emitting Diodes) and basics of electronic
circuits. The CUBLOC CB220 and CB220 Proto-Board is used in this
example.
As you can see in the above pictures, a simple golf swing
can produce desired letters or images. You can modify this app to
work on a tennis racket, motorized POV, or anything that moves faster
than the eye can see.

You can also check out the Nike ad using this golf POV.

Click Here to View in Full Screen Mode

Here’s a light orb alarm clock you can build using a CUBLOC CB280,
CB280 Mini-Protoboard, and a CLCD420B. This light orb will change
colors and also sync to on-board piezo music. You can set the alarm
to go on in the morning so you wake up to lights instead of an
annoying traditional alarm clock.
via zedomax

Here’s a simple wall clock with thermometer you can make using
CUBLOC CB290, CB290 Protoboard, DS1620, 3 CSG-4Ms, and
1 CSG-4S seven segment displays. You can also download new
programs over ethernet using Maxport Downloader as shown here.

Here’s a simple G-meter application using a CUBLOC CB220, the
Study Board, CVFD216, and accelerometer chip. You can measure
G-force of your car or airplane.

Click Here to View in Full Screen Mode

Here’s a DIY on making a simple party light using some
bulbs from Home Depot and CuSB22R. This could easily be modified
to be the “ultimate” party light.

Do you need to control your vehicle using your cellphone or track
where it is in the world on your computer?
Here’s a cool smart car system built using the CUBLOC CB220 as the
brain and CLCD420B for display. They obviously hooked up some GPS
modules and some GPRS modems to make it work nice.
Our distributor in India built this,
awesome job guys!

Also check out the PDF with detailed features.
If you want to get hands on one of these systems or be a distributor
for it if you own a Auto company, contact Autopay Solutions.

For more pictures, click below!
Read the rest of this entry »