Check out the new Make volume 09 at your local bookstore such as Barnes and Noble or Tower Records. Our Ad in on p.5. Make Magazine has lots of fun DIYs and stuff you can MAKE. Check out their blog too if you haven’t yet.

Check out this smartMMS system which allows you to monitor and control your CNC machine remotely.

This device is new so I don’t think it’s on their homepage yet but you can inquire them about getting one here.

Click Here to View in Full Screen Mode

Here’s a digital thermometer example using a CB280 Start Kit,
CLCD420B, and a DS1620 chip.

via zedomax

Click Here to View in Full Screen Mode

Here’s a simple DIY on using a CuSB22R and some parts to make
Christmas Light controller in 5 minutes. This is very similar to the
party light howto.
This can be applied to make other types of light controllers or
anything that is DC or AC.

via zedomax

Click Here to View in Full Screen Mode

Here’s a simple howto on making a digital drawing board using a
CUBLOC CB280, GHLCD, and the study board.

Click Here to View in Full Screen Mode

Here’s a fun Golf POV (Persistence of Vision) application you can make
and learn about LEDs (Light Emitting Diodes) and basics of electronic
circuits. The CUBLOC CB220 and CB220 Proto-Board is used in this
example.
As you can see in the above pictures, a simple golf swing
can produce desired letters or images. You can modify this app to
work on a tennis racket, motorized POV, or anything that moves faster
than the eye can see.

You can also check out the Nike ad using this golf POV.

Click Here to View in Full Screen Mode

Here’s a light orb alarm clock you can build using a CUBLOC CB280,
CB280 Mini-Protoboard, and a CLCD420B. This light orb will change
colors and also sync to on-board piezo music. You can set the alarm
to go on in the morning so you wake up to lights instead of an
annoying traditional alarm clock.
via zedomax

The simple answer is yes, we just finished a basic testing with Mach3 CNC software and it works fine. Directions are at the forum.

Now I hear that they also have CNC stepper motor drivers which should be able to be controlled using CUBLOC and CuTOUCH. That will be our next step in this integration of an industrial CNC software/driver and Comfile products.

Here’s a simple G-meter application using a CUBLOC CB220, the
Study Board, CVFD216, and accelerometer chip. You can measure
G-force of your car or airplane.

Click Here to View in Full Screen Mode

Here’s a DIY on making a simple party light using some
bulbs from Home Depot and CuSB22R. This could easily be modified
to be the “ultimate” party light.

Do you need to control your vehicle using your cellphone or track
where it is in the world on your computer?
Here’s a cool smart car system built using the CUBLOC CB220 as the
brain and CLCD420B for display. They obviously hooked up some GPS
modules and some GPRS modems to make it work nice.
Our distributor in India built this,
awesome job guys!

Also check out the PDF with detailed features.
If you want to get hands on one of these systems or be a distributor
for it if you own a Auto company, contact Autopay Solutions.

For more pictures, click below!

Wow, here’s a cool internet controlled security robot using CUBLOC
CB280, CuBASE 32M, CLCD420B, and a MAXPORT. Thanks Shelato!

There are two components to the interface. One a Visual basic program that sends and receives commands to the cubloc. Two, the cubloc program that receives the commands, controls the cubloc and turns the outputs on and off.

The fully load version on the test stand. It runs wireless!!!!!!!! However, I’m tethered to the power supplies for the Linksys router and Cubloc power supply. Next weekend we go to full battery power.

The Maxport is sticking out the backend of truck connected to the Linksys router through the blue ethernet cable. 2 Green lights can been seen on the Cubloc. The LCD display is in the passanger window.

via cubloc forum

Click Here to View in Full Screen Mode

Here’s an experimental alarm system you can build using a CUBLOC
CB280, CUBLOC Study Board, CLCD420B, Keypad, Keypad Controller,
and some parts from Radio Shack and Home Depot.

via zedomax

Allied Safety has used a CUBLOC CB220 module and a graphic LCD
to create a proximity warning system for high voltages in industrial
environments.

• Allied Safety Engineering, LLC develops products to save lives.
• Their primary products are high voltage proximity warning devices
  and line contact warning devices. Proximity warning devices have
  been used successfully for decades to prevent heavy equipment
  from coming into contact with high voltage lines.
• ASE has developed advanced patented technology to provide
  the most advanced proximity warning devices in the industry.
• When a vehicle strikes a high voltage line, death most often
  occurs when personnel come into contact with the energized
  vehicle while in contact with the ground below the vehicle.
• Details of the study are included in the references.

Our Dominican Republic distributor made a wine cellar temperature
controller for his wine making friend using a CuTOUCH CT1721.

You can contact him directly for details on how to get hands on one
of these so you don’t have to manually maintain your previous wine…
Click below for more pictures!

Above: Before and After Pictures of using the Perm Machine.

Here’s a cool fuzzy logic perm machine for salons over in Japan using
CUBLOC CB280 module and GHLCD graphic LCD from Comfile.

The CB280 uses Ladder Logic to control the complex fuzzy logic of
the perm machine hair dings (The things you roll your hair with).
This thing also has an XPORT module which allows the company to
analyze and fix customer’s problems over the internet on top of
updatable firmwares.

The company grew 10 times in size and moved their offices twice
due to massive growth of sales. They are now bigger than Comfile
Technology… :p
The above example uses a customized firmware version of MAXport,
for custom internet MAXport inquiries, please send them to
engineering@comfiletech.com.

Click below for more pics!

Here’s an industrial air heater pump from Exergy using CuTOUCH
CT1721.

Click below for more pics!

FusionTech, an industrial equipment company in Korea, made a
wireless data acquisition system and a PCB chemical processing
machine using CuTOUCH CT1721.

Click below for more pics!

Here’s a microporator using CuTOUCH CT1720. We are not sure what it does
but it has something to do with transfection and DNA technologies.

Click below for more pics!

Microporation is a novel and proprietary electroporation technology developed by Digital Bio Technology. Before the Microporation, all of the electroporation is dependent on the plate-type electrode and cuvette style chamber. Microporation is a unique electroporation technology using a pipette TIP as an electroporation space. In doing so, the uniform electric field is generated accompanying minimal heat generation, metal ion dissolution, pH variation and oxide formation, which are harmful events to the cell during conventional electroporation process. Great transfection efficiency and cell survival rate is only a few benefits from the Microporation technology.

Here’s a laminating machine using CUBLOC CB290 module and
CuBASE-64M by Doo-il company that makes various industrial machinery.

We, DOO-IL R.S. CO., LTD was established in 1991 and our company has reached a leading position in the packaging field through the manufacturing various machinery and suppling through domestic and world distributor channel. Thanks of keep trust from clients, we are growing up continuously and we will work through as a specialist in this field and also as in the company name we will supply always only the “Right Source” for the valuable customer and will try our best to supply most reliable product at most competitive quality and cost. “Customer comes first!” is our first valus of principles.

via zedomax

Robo3, a Korean robot company, made a robot based on the Segway
balancing structure.
The CuTOUCH CT1721 touchscreen controller is used as the brain.
Here’s a video of the robot doing some line-tracing and playing with
kids:

Just in from Chosun news in Korea, robo3 just developed a robot based on Segway structure. The robot can dance, run, and wake you up in the morning. It has 2 axis control to balance itself and can detect surrounding objects and obstacles. The robot can be remote-controlled or manually driven. The controller being used in the robot is a touch PLC from Comfile Technology, where I work, I didn’t even know you could make something like this… Yes, it can be customized and programmble via RS232 it says… Hmmm, maybe I can convince them to send me a sample… It seems like the company also sells the segway platform for building robots w/ any embedded computers…

via zedomax

We will update new company news here from now on. :0)